Re: Fly by wire gas pedal mount - 65C10
I saw something interesting a couple weeks ago, a friend of mine who is a street rod builder put a late model hemi with dbw in an old Chrysler I think it was late four ties early fifties. he took the pedal and cut the foot part off and made a Bracket to mount it on the intake. The part that would mount to the fire wall was mounted to the bracket so the foot pedal part would stick up towards the hood this bracket assembly was probably two to three inches from the fire wall. He then used lo kar style pedal which was mounted regularly on the fire wall and ran the cable through the fire wall and attached it to the stubby part of the pedal that was left over from the part that was trimmed off. I hope you can under stand this I will try to get pictures later it was real clean install and used a cable pedal to actuate.
Posted via Mobile Device
|