Front drive shaft hitting trans pan
Has anyone had this issue when re-installing your front drive shaft on a LS swap? I'm wondering if the transfer case has enough play to rock towards the passenger side a bit. Just the corner of the shaft is hitting the corner of the trans pan. It's a new drive shaft and seems a little beefier than the original one, but I wanna see if any of you have run into this and what you did to fix it. I know there are some threads on this subject, but since most were several years ago, just seeing if anyone has come up with new solutions.
__________________
1972 GMC Jimmy 6.0/4L65
1972 Chevrolet long bed 1/2 ton
Last edited by GM man; 09-01-2017 at 12:02 PM.
Reason: additional comment
|