[Aus69c20]

I’m running a Holley sniper.
I already had a carter electric pump mounted to the frame under the cab and the stock tank. I mounted a surge tank/swirl pot, with a walbro efi pump inside, behind the cab. The carter pump feeds the efi pump inside the surge tank which then runs to the efi unit.
Then the return line runs back to the surge tank which also has a return line back to the stock tank. I had a 3/8 pipe put into the fuel sender for the return.

This set up works very well and I can run the tank to near empty with out any fuel supply issues. With the efi pump inside the surge tank it is near silent.