The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 08-18-2018, 08:53 PM

brand new L31 create engine 4 bolt main version going in today .

then the th400 with trans go shift improver kit and modified governer for better shift points was installed along with a np203/np205 transfer case combo with the offroad design doubler kit to mate them together . http://offroaddesign.com/catalog/doubler.htm http://offroaddesign.com/catalog/Tri...ckShifters.htm

helps to set the cab and front clip back on the 2wd doner frame . then use 2 engine hoists to set the combo in the frame .

now to mate them together again and check floor clearance of doubler and make hole for the 3 shifter levers .

08-18-2018, 08:53 PM	#36
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: just scored this 87 c10 long bed brand new L31 create engine 4 bolt main version going in today . then the th400 with trans go shift improver kit and modified governer for better shift points was installed along with a np203/np205 transfer case combo with the offroad design doubler kit to mate them together . http://offroaddesign.com/catalog/doubler.htm http://offroaddesign.com/catalog/Tri...ckShifters.htm helps to set the cab and front clip back on the 2wd doner frame . then use 2 engine hoists to set the combo in the frame . now to mate them together again and check floor clearance of doubler and make hole for the 3 shifter levers . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.