The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 08-22-2018, 05:56 PM

burned in and holes drilled 4 - 1/2" to bolt the bottom section to the main section . then there wil be a tie in point later for the 2" reciver to the goosneck hitch for 1 SOLID pulling platform .

even made angled washers to line the 4 - 1/2" bolts up correctly on the slope of the c-channel . that upper one did get fixed for full flat seat . he was a hair to long was all .

thinking a 2nd plate area on the left also so i can run legal plate and this old school ad plate . there will be a bar stock brim like a hat above the plates to hide the light and protect them . will be bent with a 30* - 45* on each end and swing back in for a sweapt look .

08-22-2018, 05:56 PM	#44
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: budget beater c10 to k30 swap over build. burned in and holes drilled 4 - 1/2" to bolt the bottom section to the main section . then there wil be a tie in point later for the 2" reciver to the goosneck hitch for 1 SOLID pulling platform . even made angled washers to line the 4 - 1/2" bolts up correctly on the slope of the c-channel . that upper one did get fixed for full flat seat . he was a hair to long was all . thinking a 2nd plate area on the left also so i can run legal plate and this old school ad plate . there will be a bar stock brim like a hat above the plates to hide the light and protect them . will be bent with a 30* - 45* on each end and swing back in for a sweapt look . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. Last edited by sweetk30; 08-22-2018 at 06:04 PM.