[landarts]

In my installation of the kit I removed the s-terminal wire from the old starter solenoid and placed it on the s-terminal of the remote solenoid.
Then removed the r- terminal wire from old solenoid and placed on remote solenoid r- terminal.
Then installed buss bar across the s-terminal and positive terminal on starter. Also installed battery cable on positive post of starter....there are no other wires hooked to the starter now except the positive battery cable which goes up to the right side of the remote solenoid.
Then hook the positive battery cable to positive side of battery and the left post on the remote solenoid.
Then extended the wires that were hooked to the positive battery post over to the left side post of the remote solenoid.

Jim