Quote:
Originally Posted by rocknss
I would not solder the connections, No wires used in cars are soldered. They are all connected using male and female solder less connectors. You can buy solder less connectors that support multiple wires. And yes you can get them that will bridge them together if needed.
|
GM has used soldered crimp connections for decades so yes soldering is ok to do.
Take a single strand of say, 10ga wire maybe 6" in length and wrap the bundle of wires together in opposite directions tightly. Then, solder the connection fully and slide a section of dual wall polyolephin tubing over it and slowly heat it until the sealant starts to creep out of each end-fully soldered AND sealed now!