View Single Post
Old 07-18-2010, 09:25 AM   #12
ChevyTech
Registered User
 
Join Date: May 2004
Location: Minnesota
Posts: 4,620
Re: 1990 chevy code 42

Quote:
Originally Posted by misfits
Ok, I finally found the set timing connector. It was unhooked so I plugged it in and the truck still runs like crap. I'm going to go check for codes now.
Thanks for letting us know what you found.


Quote:
Originally Posted by misfits View Post
I got the code cleared. I had to find a video on you tube to find the connector so I now I feel dumb... So now I found the u joint in the rear shot one of the caps off so its on to fix that.
Thanks for your help.
It sounds like your truck is keeping you busy.


Quote:
Originally Posted by 70BLAZERX2 View Post
just for info,my 94 timing connector is under the dash,right where the wire harness comes through the firewall. its a 94 4.3 2wd 5 speed.
Yes:
In 1994 the set timing connector was moved to inside the cab on the C/K trucks. This is another example of why it is important that people give vehicle information when posting. Many people are posting questions on the board here that do not have enough vehicle information so that a good answer can be given.
__________________
For those of you that are wondering why you are not getting replies to your thread:
Did you give the model, year, engine, fuel system type, and transmission information?
If it is modified from what came stock from the factory, let us know that too.
ChevyTech is offline   Reply With Quote