View Single Post
Old 12-16-2016, 11:46 AM   #17
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,134
Re: Roof replacement?

Quote:
Originally Posted by 68blackbird View Post
Roger that on addressing the inner rust areas, all in all that part does not look too bad. Here are pics with drip removed. The spot weld bit did great where I could see them. There were several areas where I used cut off wheel and very slowly removed metal. I'm hoping I did not fork up here...the area above the windshield, I know I committed one of the body work sins, do not remove anything until you have replacement piece in hand. I have not ordered the roof panel yet, did I cut too much away from the front and just create a bunch more work for myself...
That all looks good so far. just treat the rust with a converter and order the roof skin. The lip on the front will have to come off leaving just the inner panel lip. The Dynacorn panels we use a sell fit very well so I wouldn't worry about letting it sit till you get it.
dwcsr is offline   Reply With Quote