[Jaysonb]

I have been slow to start working on this project, I have driven it quite a bit, and it seems to be growing on me. The big puff of smoke on start up was getting to me, so I decided to start working on it. I started by pulling all of the emissions stuff off the engine, put valve stem seals in it, swapped in a regular hei distributor, and dropped off the carb for a rebuild. The carb won't be ready for another week, so I thought I would tackle some of the rust. I started on the right box side. I was able to work on it for about 5 hours yesterday, this is how far I got. I hope to get the box side done by the time I get the carb back.