The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Help With Upper Control Arm and Spindle Rubbing

Texas66 · 04-15-2017, 08:51 PM

Pwrbrk, Palf
Thanks for the input. Hopefully when I get the truck back on the ground the rubbing will be cured.
Issue for now is the two different sizes on the inner and outer tie rods.
Is there such a thing as an adjusting sleeve that works for this situation? I thought adjusting sleeves are the same size on both ends. If someone makes one that has different sizes on each end then that should solve my problem.

04-15-2017, 08:51 PM	#6
Texas66 Registered User Join Date: Mar 2017 Location: Pearland TX Posts: 37	Re: Help With Upper Control Arm and Spindle Rubbing Pwrbrk, Palf Thanks for the input. Hopefully when I get the truck back on the ground the rubbing will be cured. Issue for now is the two different sizes on the inner and outer tie rods. Is there such a thing as an adjusting sleeve that works for this situation? I thought adjusting sleeves are the same size on both ends. If someone makes one that has different sizes on each end then that should solve my problem.