The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

95 S_Trucker · 02-24-2017, 03:38 PM

Z height should be 4.2"-4.5"

Z height is the difference from the center axis of the lower control arm bolts(at the frame) and the lowest part of the steering knuckle(do nut measure from the ball joint stud or nut)

You'll need a flat surface and a 2ft level.

02-24-2017, 03:38 PM	#2
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,179	Re: A quick torsion bar question with pic Z height should be 4.2"-4.5" Z height is the difference from the center axis of the lower control arm bolts(at the frame) and the lowest part of the steering knuckle(do nut measure from the ball joint stud or nut) You'll need a flat surface and a 2ft level.