|
Re: 700r4 to np205 question
Quote:
Originally Posted by YoungPup1977
If you cut the original output shaft you are cutting the splines off the shaft. That’s why you can not use the original 700 output shaft. If the original output shaft was splined to the governor provisioning you could cut the shaft but that’s not the case. I pay 60 bucks for the shorter output shaft. Ebay has it for around 125 with shipping. One more thing, when doing this conversion leave your transfer case in the stock location and move the engine crossmember forward.
Posted via Mobile Device
|
X2 on this info.
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .
EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
|