The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Any recommendations for a transmission jack and process?

68gmsee · 08-11-2017, 09:57 AM

Unless you are planning on new u-joints you don't have to disassemble the driveshaft to place the yoke at the end of the transmission. If you drain it first you can tie a rag around the end. If you leave the fluid in, tie a plastic bag tightly around the end and secure it with electrical tape or rubber bands.

08-11-2017, 09:57 AM	#17
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Any recommendations for a transmission jack and process? Unless you are planning on new u-joints you don't have to disassemble the driveshaft to place the yoke at the end of the transmission. If you drain it first you can tie a rag around the end. If you leave the fluid in, tie a plastic bag tightly around the end and secure it with electrical tape or rubber bands. __________________ 68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...