View Single Post
Old 08-12-2014, 03:46 PM   #19
Registered User
foamypirate's Avatar
Join Date: Apr 2009
Location: Pflugerville, TX
Posts: 594
Re: Back to the Basics: Rebuilding a steering coupler rag joint

Thanks for the write up, Tx! I rebuilt the suspension on my 84' C10 about a year ago and it's been getting progressively sloppier. I guess all the fresh new tight hardware put a little extra load on the rag joint and finished er' off. Tons of slop in the joint when I look under the hood and have someone turn the wheel. I'd heard some people saying Dorman's full replacement has the nub backwards so the steering wheel is off, so this seems like the best route to go. Thanks again!
foamypirate is offline