The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Gregski** · 03-10-2016, 11:57 PM

so lets seal the deal shall we, I am so glad I was talked into replacing the valve seals, I have never done that before, but let me tell you they were passed it

plus I had to use the vice grips to pull them off, and that pretty much sealed the deal that they aint going back on, all ovalized now and such

so one big reason why I just had to take a peak at those seals is that the Engine Specs called for two separate part numbers for new valve seals

10212810 - Intake (Valve Stem Seal Type: Umbrella, Valve Stem Diameter 0.344 in., Valve Guide Diameter (in): 0.500 in.)

12564852 - Exhaust (Specs unknown)

have any of you heard of this, can anyone comment please, to me they both look the same

03-10-2016, 11:57 PM	#2923
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,805	Re: Restoring Rusty so lets seal the deal shall we, I am so glad I was talked into replacing the valve seals, I have never done that before, but let me tell you they were passed it plus I had to use the vice grips to pull them off, and that pretty much sealed the deal that they aint going back on, all ovalized now and such so one big reason why I just had to take a peak at those seals is that the Engine Specs called for two separate part numbers for new valve seals 10212810 - Intake (Valve Stem Seal Type: Umbrella, Valve Stem Diameter 0.344 in., Valve Guide Diameter (in): 0.500 in.) 12564852 - Exhaust (Specs unknown) have any of you heard of this, can anyone comment please, to me they both look the same Attached Images Last edited by Gregski; 03-11-2016 at 12:02 AM.