|
Re: Panhard bar with aftermarket rearend.
Quote:
Originally Posted by GASoline71
I don't have a race truck by any means... Just a 1972 GMC C15, with a snotty 355 and a worked over TH350. The stock 12 bolt rear end housing with an Eaton Posi, Moser axles, and Richmond 3.73's hung on the stock coil sprung rear end.. I have a thick Moser diff cover with the cap girdles and it clears the stock panhard rod just fine. I thought it was kinda odd when I bolted it on as I had always read where cats had a prob with the bar hitting the thicker covers.
Gary
|
I think it's the long aftermarket panhard bars that mount across the rearend on the pass side trailing arm most people have trouble with in regard to the aftermarket diff covers.
__________________
Adam
1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac
1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's
1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac
2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80
2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac
 
Use the SEARCH function on this forum - it is your friend!!
|