Thanks Hatzie for all the info.
Ill go ahead and order parts for the diode mod.
As I mentioned in my PM though, I definitely have an additional port on my liquid line that needs something... I assume if I find the right switch I can just use it to plug the hole. And just use the LP switch on the dryer.
I was able to get the rubber nuts I need to mount the condenser at lowes today. Unfortunately the condenser didn't mound up close enough for the crossover pipes. So I had to make a couple new small brackets to mount the condenser closer to the drivers side. Everything fit then.
My next issue was getting the stiff liquid line to fit with the crossover pipe. It was 2-3" short when trying to get it to mount. So I ended up straightening the liquid line out and rebending it. Its not overly pretty but it works. Everything else fits up. So now I just need a couple orings, a couple switches and a bracket to hold the dryer in place.
