[tdangle]

I agree with some of the previous suggestions. Pull the plugs find TDC for #1. Verify the timing mark on the balancer. Once that is know good, Reinstall the Dist with the rotor pointing to #1 plug. Put all the plugs back in and double, triple check firing order and spark plug wires. I bet that fixes it. If not at least you will know the ignition is good. You may also want to make sure you have full 12V to the Dist/Coil set up as points system used reduced voltage as to not fry the points.

Once the ignition system is working correctly, the Fi-Tech system will probably need to relearn.

Good Luck. Remember Keep it simple and methodical in trouble shooting.