Quote:
Originally Posted by Speedysdad
That is good info. I am making Skymangs custom engine mounts. It gives me a lot of options. Good to know on the radiator surround. Thanks
|
speedysdad, throw away those headers and get some camaro rear dump manifolds. and if you must have headers, get some block huggers. try mocking your motor up with a chunk of 2x4 laying flat in the center of the crossmember, then put the oilpan on that. 13/4. now use a jackstand on the tailshaft, now make sure everything clears and wala! i've built them down to 2.5 inches off the frame (thats mount heigth not floor). and on the rad, just use a cutoff wheel to shave the bolts down.