The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 06-17-2012, 10:05 PM

Not much exciting to see, just more toil on the bodywork. Got some glazing putty which really helps on those pinholes. Both rear fenders are worked and mostly skimmed, hood is ready to go, ds fender is spot on, and pass side fender just has a little shaping left on the front. One door bottom has made tons of progress in smoothing out, but still needs a light coat and then a skim. Tomorrow should be more of the same.

06-17-2012, 10:05 PM	#192
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Br3w City's Project omgwtfbbq Not much exciting to see, just more toil on the bodywork. Got some glazing putty which really helps on those pinholes. Both rear fenders are worked and mostly skimmed, hood is ready to go, ds fender is spot on, and pass side fender just has a little shaping left on the front. One door bottom has made tons of progress in smoothing out, but still needs a light coat and then a skim. Tomorrow should be more of the same. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD