Re: New diy electric fan!
Sorry for a late response. The shroud is actually just sheet metal. Fits perfectly on the radiator in between the tanks on the side. Simply folded it welded the corners and painted it. Used a jig saw with a metal blade to cut the holes. As for the temp sensor I got a thermostat housing spacer with 4 1/2" tapped holes in it. Plugs came with it as well so I'm only using one hole. You can see it in the third pic and you can see the sensor as well. Had to get a bushing from 1/2" to 3/8"npt.
|