[dznucks]

I used the plug wire off of a vette when i had rams horn manifolds. they are much longer than the truck wires which allows you to route the wires under the manifolds.

LMC has some spark plug wire stands/holders that will work for these types of plug wires and you can see how they are routed. on page 158, in the Ignition section, of my LMC catalog, they have the plug wire retainers for the vette style wires with the ram horns manifold.

and depending what version of the manifolds you have, i would grind the manifold casting a bit around plug 6. this was notorious for burning the boots and casuing arching. the manifolds pictured above are much nicer castings than mine were and they clearly dont have the problem. but some do.