The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - BROWN WHITE Striped wire from the Ignition switch Burnt what can cause this?

72blazerblue · 03-08-2017, 11:00 AM

VetteVet, I am following what you are saying thanks a lot!

I guess where I was confused is I was thinking that a 67 would not have that brown 12G wire at all, since it did not have an ACC position from factory.

By what you are saying, I should still have a 12G brown wire under there somewhere because something would have to power the wiper, TS, heater, and backup light fuses. Am I correct?

By this diagram that you posted earlier, it looks as if on a 67 the Brown 12G wire would have connected to the IGN tab whereas later years it would connect to the ACC tab?

03-08-2017, 11:00 AM	#28
72blazerblue Registered User Join Date: Feb 2012 Location: Durant, ok Posts: 218	Re: BROWN WHITE Striped wire from the Ignition switch Burnt what can cause this? VetteVet, I am following what you are saying thanks a lot! I guess where I was confused is I was thinking that a 67 would not have that brown 12G wire at all, since it did not have an ACC position from factory. By what you are saying, I should still have a 12G brown wire under there somewhere because something would have to power the wiper, TS, heater, and backup light fuses. Am I correct? By this diagram that you posted earlier, it looks as if on a 67 the Brown 12G wire would have connected to the IGN tab whereas later years it would connect to the ACC tab? Attached Images __________________ 1967 SWB C-10 1972 Blazer 4x4 2011 Silverado