Re: A-arm shaft?
Also, you mention buying to proper sockets to fit the control arm shaft bushings?
I ended up buying Metric sizes because the sockets for these bushings are BSW sizes and are very hard to come by. BSW= BRITISH STANDARD WHITWORTH.... The threads are also Whitworth threads on the O.D. of the bushings and the I.D. of the control arm shafts....
The sockets that will fit in the Metric version or the closest I could break it down to would be a Metric 36MM Socket for the upper bushings. And the lower bushings will accept a 42MM Metric socket.
Hope this helps.....
__________________
Kev's-C-10
|