The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

71jimmy · 01-13-2014, 06:57 PM

Front cross brace with measurements. This is going to be the hardest to reproduce unless you have one side by side since the ends are offset. Keep in mind your actual measurements may differ slightly due to inaccuracies in frame dimensions etc. Things were not as tight as they are now. And after 40 years or so, even you start to sag

01-13-2014, 06:57 PM	#9
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Re: Hickey Sidewinder installation Front cross brace with measurements. This is going to be the hardest to reproduce unless you have one side by side since the ends are offset. Keep in mind your actual measurements may differ slightly due to inaccuracies in frame dimensions etc. Things were not as tight as they are now. And after 40 years or so, even you start to sag Attached Images __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."