The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Zook75 · 01-08-2018, 06:50 PM

Thanks for the info guys. turns out it was rust in the drive cable itself. After going back and forth with the drill it broke about 4" into the casing. we pulled the other end of the cable off and the cable would not move at all and the window was still stuck. so 3 bolts later and the transmission or what ever it's called came off and the window came down. A small screw driver in the cable hole in the trans turns it easy but with it installed the window will not move. So a new cable is ordered and I'm going to check this one off as an easy fix that only cost me $50.

On another note, when I was in the back I see the rear seat belts are attached to the top. So what do you do to take the top off?

01-08-2018, 06:50 PM	#5
Zook75 Registered User Join Date: Aug 2017 Location: Waggaman, La Posts: 63	Re: 91 Jimmy window issues Thanks for the info guys. turns out it was rust in the drive cable itself. After going back and forth with the drill it broke about 4" into the casing. we pulled the other end of the cable off and the cable would not move at all and the window was still stuck. so 3 bolts later and the transmission or what ever it's called came off and the window came down. A small screw driver in the cable hole in the trans turns it easy but with it installed the window will not move. So a new cable is ordered and I'm going to check this one off as an easy fix that only cost me $50. On another note, when I was in the back I see the rear seat belts are attached to the top. So what do you do to take the top off?