The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

asphaltburner · 08-06-2008, 09:49 PM

Yo! hdflstf!
Thanks! I've been eyeballing that since I got the NP205,...the twin stick will reside almost directly over the crossmember and I believe that will put it just slightly aft of the original NP203 shift location. Looks like I could be OK and I have fairly long legs, and the TH400 (no clutch is what I mean), so I could leave the seat adjusted back a bit. If it's a problem, I'll be doing some interior alteration! I'll see as I put it together and let y'all know. Todd.

08-06-2008, 09:49 PM	#21
asphaltburner Registered User Join Date: Jul 2008 Location: Ault, Colorado Posts: 862	Re: '78 3/4 ton 4x4 FRANKENTRUCK Yo! hdflstf! Thanks! I've been eyeballing that since I got the NP205,...the twin stick will reside almost directly over the crossmember and I believe that will put it just slightly aft of the original NP203 shift location. Looks like I could be OK and I have fairly long legs, and the TH400 (no clutch is what I mean), so I could leave the seat adjusted back a bit. If it's a problem, I'll be doing some interior alteration! I'll see as I put it together and let y'all know. Todd.