View Single Post
Old 09-05-2017, 09:26 PM   #42
C10Coloradoguy
Registered User
 
Join Date: Jul 2017
Location: Highlands Ranch, CO
Posts: 39
Re: Rewired 70 C10 heater and running lights on even if ign is not plugged in.

What about the third option? The option where I do jump the purple wire to each individual and ALL of them pop the fuse?

From one of the posts above: With the switch disconnected and the battery connected, jump the purple wire and the yellow and light blue (2nd test was purple jumpered to DG and DB) and turn the key on. The left/right marker and indicator lights should blink.
Nope. The Turn signal fuse popped both times I tried this.


I have also tried unplugging the front marker/turn lights (fuse blows) and disconnected the rear turn lights (fuse blows).

Now, I am willing to try jumping the purple wire jumped to each individual one but at this point I am betting that they will all blow the fuse. I will also need to buy yet another box of 10 amp fuses so that I can make sure I have at least 4 to try.
C10Coloradoguy is offline   Reply With Quote