Quote:
Originally Posted by R_W
If the harness is all original, here are some things to try:
Right around the radiator there is a 3 wire plug, it's to the left of this red wire nut, make sure it is in good
Make sure the firewall connectors are in good
And if none of that works, take the three wires going into the foot switch and try a direct short like the switch would do, to see if the switch is faulty. I don't have a diagram in front of me, so you'll have to figure that part...
Posted via Mobile Device
Posted via Mobile Device |
Thanks RW, will check it out over the weekend.
Quote:
Originally Posted by bj383ss
Rian. The switches are really cheap. On my switch the low beam side was out so I just wired it directly and they worked. So i knew the switch was bad. Can you buy this type of part in the uk. Or do you have to order it?
Bret
Posted via Mobile Device
|
Hi Brett, I have not investigated yet, but suspect one can source them at a premium, so I will probably source from the USA once I have investigated,
It may just be a connection.