Re: The Definitive 67-72 Seat Swap Guide Thread ....
These were 88-94 buckets. (power on drivers side) Shortened the backs by cutting the headrest pans off the frames before reupholstery. He was still able to use the factory molded foam this way... just trim it. My fuel tank is moved out of the cab, but a stereo panel takes up the space now. I spaced the seats for console/ leg room.. marked the floor and drilled. 3/8" bolts welded to 1/4" backing were brought up from under the floor and through the factory holes in the seats. Once I was happy with the spacing, etc... it was all welded home under the cab. Carpet/underlay installed, seats secured with washers and locknuts
|