The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Help, High idle problem TBI, how the heck do you get it down.

Bluejoe · 02-12-2018, 12:44 PM

Hello When I did the head gaskets I cleaned and rebuilt the TBI and replaced with new gasket. Now years later doing the intake manifold gaskets I found that the TBI bolts were loose. I wondered why the engine would surge. That probably was the problem. So now after I get the intake squared away I will always check the TBI bolts.

02-12-2018, 12:44 PM	#24
Bluejoe Registered User Join Date: Feb 2018 Location: South Plainfield NJ Posts: 8	Re: Help, High idle problem TBI, how the heck do you get it down. Hello When I did the head gaskets I cleaned and rebuilt the TBI and replaced with new gasket. Now years later doing the intake manifold gaskets I found that the TBI bolts were loose. I wondered why the engine would surge. That probably was the problem. So now after I get the intake squared away I will always check the TBI bolts.