The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

asphaltburner · 11-09-2008, 12:17 AM

Torqued the eight grade-eight frame member bolts as tight as I could get them with a 1/2" drive today,...drove a mile to Ault and filled the main tank, and then made several low and high speed runs near my house with the truck. Did perfect, and no leaks. Functioning well, although brakes will need further bleeding,...and re-build in the future, especially with a 350hp motor to contend with! Todd.

11-09-2008, 12:17 AM	#143
asphaltburner Registered User Join Date: Jul 2008 Location: Ault, Colorado Posts: 862	Re: '78 3/4 ton 4x4 FRANKENTRUCK Torqued the eight grade-eight frame member bolts as tight as I could get them with a 1/2" drive today,...drove a mile to Ault and filled the main tank, and then made several low and high speed runs near my house with the truck. Did perfect, and no leaks. Functioning well, although brakes will need further bleeding,...and re-build in the future, especially with a 350hp motor to contend with! Todd. Last edited by asphaltburner; 11-09-2008 at 12:18 AM.