The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

geezer#99 · 10-28-2012, 01:25 PM

You'll need to mount the z-bar further ahead on the frame, not shorten the clutch rod.
The position of the pivot ball on the motor will move forward.

10-28-2012, 01:25 PM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,516	Re: engine mount location You'll need to mount the z-bar further ahead on the frame, not shorten the clutch rod. The position of the pivot ball on the motor will move forward.