The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cleszkie · 08-07-2017, 02:57 PM

I'd stick with brass. Its most likely all brazed together. Odds are that the aluminum one has epoxy holding the tanks to the core. The epoxy has a tendency to crack over time.

08-07-2017, 02:57 PM	#2
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: heater core I'd stick with brass. Its most likely all brazed together. Odds are that the aluminum one has epoxy holding the tanks to the core. The epoxy has a tendency to crack over time.