Quote:
Originally Posted by Roadkill58
Do you have a pic of how you mounted the swaybar end to the frame?
|
no, i don't have a picture of the actual mount, but here's what i did:
the trans am sway bar hit my stock springs, i had to heat and bend each side in ~3/4''.
murrys auto parts had some short, 3'' or 4'' links on the shelf and i just fabbed a bracket on the frame.
the bracket is U shaped, cut out of some 1/4'' wall 1.5'' square tubing.
i used a similar bracket to mount bump stops above the c-notch on the side of the frame.