The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FnLow69 · 10-25-2010, 01:42 AM

Well i worked on it last night and today. Got the other tie rod notch done and the welded and smoothed. All the joints will get plated later. Today I got the front crossmember in and made the upper A-arm mounts still need to make some gussets for them.

Anyways here are the pictures...

Crossmember tacked in...

Lower arm bolted up...

The upper arm mounts...(forgot to take progression shots)

Spindles and rotors on...

What do you think?

Justin

10-25-2010, 01:42 AM	#34
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Well i worked on it last night and today. Got the other tie rod notch done and the welded and smoothed. All the joints will get plated later. Today I got the front crossmember in and made the upper A-arm mounts still need to make some gussets for them. Anyways here are the pictures... Crossmember tacked in... Lower arm bolted up... The upper arm mounts...(forgot to take progression shots) Spindles and rotors on... What do you think? Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:36 PM.