The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 05-21-2017, 08:35 PM

Took the Impala Friday morning and had it detailed for the cruise in that we did on Saturday. Drove it a bit over 150 miles with outside temps in the 90"s and the AC ran all day at 38* inside. I was very pleased, well until the electric fan went out any way. It did Ok afterwards but it would run hot at red lights but we made it home Ok. I spent the day installing the old fan I had in the truck before the LS swap. It's two speed windstar van fan and it moves some air. I ran it for 30 minutes sitting in the garage with the ac on and it never went above 180*.
After we did the cruise in and eat lunch I headed over to David Hess place and we swapped even for his tilt column for a console. So all I need now is to clean it up, paint and install it.

05-21-2017, 08:35 PM	#33
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Working....64 SS Took the Impala Friday morning and had it detailed for the cruise in that we did on Saturday. Drove it a bit over 150 miles with outside temps in the 90"s and the AC ran all day at 38* inside. I was very pleased, well until the electric fan went out any way. It did Ok afterwards but it would run hot at red lights but we made it home Ok. I spent the day installing the old fan I had in the truck before the LS swap. It's two speed windstar van fan and it moves some air. I ran it for 30 minutes sitting in the garage with the ac on and it never went above 180. After we did the cruise in and eat lunch I headed over to David Hess place and we swapped even for his tilt column for a console. So all I need now is to clean it up, paint and install it. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB!* After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.