Re: Low Idle, Rough Acceleration, Shakes a bit
Quote:
Originally Posted by duffs396
Thanks for the suggestions ChevyTech.
Timing and wires double checked. Also did manual TDC check as well.
I sprayed the EGR when running and no change. I've manually pushed it open and the truck stalls and then returns to idle.
I redid the grounds at the firewall (straps and on the frame). Does it matter where the grounds are at the front of the intake?
|
You're welcome!
The ground location does not matter as long as they get a good connection to ground. I have run across several that were at the thermostat housing and not getting a good ground. I prefer to put them on a stud on a intake to head hole (intake bolt).
__________________
For those of you that are wondering why you are not getting replies to your thread:
Did you give the model, year, engine, fuel system type, and transmission information?
If it is modified from what came stock from the factory, let us know that too.
|