|
Re: Let's Build A 1 Ton Crew Cab 4x4
Quote:
Originally Posted by daddyjeep
I know that you are already done with the shackle on the rear of the springs, but maybe you should just revisit that instead of building the big drop brackets for the front. I have seen shackle hangers frenched into the frame before on LCG Jeeps so there is no reason you couldn't come up with something to fit your needs. Just food for thought.  |
What do you mean? What I am doing to the front is to fix the caster angle and shackle angle problem I have. It is what you have to do unless you plan on cutting tubes loose and rotating the hog head and welding them back. As far as I know anyways.
This is what another person did to fix the problem. He had bought the B-52 mounts and then come to find out his angles were all wrong so he dropped it down 3" to get his caster at 8deg which is what it is factory.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
|