Re: Any ring and pinion guru's out there?
I would say you will need to shim , you want to see things more in the center , they are web sites that have actual pictures that would give you a better understanding of what your end results should be ,its harder to undertstand if I explane it (a picture is worth a thousand words goes better in this case). But since this is a referance check because you have not rebuilt it yet , I think after the rebuild and more often then not the original oem shim setup should get you where you need to be . but find some online picture of a good setup so you are clear where you need to be .
Last edited by Jrainman; 08-09-2018 at 03:45 PM.
|