Well I got a little futher along today. I finnally got all the under hood wires and under the dash wires run.
I droped the stock tank and, it is a good thing I did it was just about to rust through. I changed out the old stock pump in my EFI tank with a new pump and, ran my lines from the tank to the switching valve. Also ran the lines along the frame up to the throtle body.
I pluged in my cluster and wired my Check engine light and turned on the ignition and presto all my lights worked
.
All I like now is installing my EFI tank, wire the pump, change the orings for the throttle body gas lines, put my pullys back on the engine. Then fire that mother up!
Pics tomarrow.(I left the camera at dads shop)
