Quote:
Originally Posted by aggie91
Installing the side glass into the regulator is easier with the glass and regular in the full up position. Using some masking tape, go from the inside of the glass, over the top of the door to the outside of the glass to hold the glass in the run channels in the full up position. With the regulator also in the up position, the rollers go in the tracks fairly easy.
Hope this helps on the other door.
|
Thanks. I was able to get the other one in. Slightly easier this time. I had more problems with the vent window not fitting correctly on this side. Finally got it. Then I mangled the outer wipe strip. So now I have to replace that. Always something!