The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - For Those Doing Disk Brakes. 60-66

bubba327 · 06-26-2009, 06:24 PM

Well Hi neighbor! the 71 parts fit nicely, but one bolt hole in the frame needs a little elongating to the rear by about 1/4" (the bottom front bolt -the hole in the side bracket is threaded already. The other holes all line up. I rationalized that if the entire crossmember and steering components are off a 71, then I can remember that in the future if I need replacement parts

06-26-2009, 06:24 PM	#94
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: For Those Doing Disk Brakes. 60-66 Well Hi neighbor! the 71 parts fit nicely, but one bolt hole in the frame needs a little elongating to the rear by about 1/4" (the bottom front bolt -the hole in the side bracket is threaded already. The other holes all line up. I rationalized that if the entire crossmember and steering components are off a 71, then I can remember that in the future if I need replacement parts __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"