Re: Help me! Please
Quote:
Originally Posted by loujizzel
That may be true the possibility of something like that happening is it far-fetched at all disgruntled employees and all I'm pretty sure they're three inch drop but regardless even if they weren't even if they sent me just a one inch drop it should still be sitting lower than what it is now I'm at work now but I can't wait to go home Jack the truck up losing everything and set it back down I might even go drive with it loose see if that will help it settle some had I known Polly bush would be like this I would have never gotten them I would have just put in regular OEM bushings
|
Take/verify dimensions.
Loosen the hardware.
Open the hood.
Stand on the front bumper while holding onto the front edge of the hood for balance & give it H#@L. Get some movement going.
Re-check the dimensions.
Re-tighten hardware w/the suspension compressed.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|