|
Re: Porterbuilt 1" forward control arms sway bar help
Quote:
Originally Posted by lolife99
Scot,... How much difference is there in the "eye-to-eye" length of the Belltech and Ridetech bar over The PB spec Addco bar?
I have a set of Thorbecke Bros. a-arms on my blazer with a Ridetech MuscleBar.
I assumed the Thorbecke a-arms were just copies of the Ridetech a-arms,... which I thought would work with any aftermarket C10 sway bar that utilized end links.
I also thought the only "custom" sway bar from Porterbuilt was the Addco bar specifically made for the Dropmember equipped trucks,.... which would be alot narrower.
|
Prob about 4" difference. The PB spec'd Addco bar (& Ride Techs Musclebar) has the end links @ approx 44" apart. When you put the Bell Tech C10 bar I purchased beside it, there was about 2" difference each side. I'll measure it today just for reference.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|