The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Kim57 · 10-08-2009, 02:50 PM

Here's a quick up-date.
I had to come up with a new core support so this is what I did.
I took a piece of 2" OD tube and cut it down. Then I welded some nuts on the back of a couple of washers that fit inside the tube and welded them in.
They are just tacked on my frame horns for now. Will finish after I make sure everything fits as it should.
Kim

10-08-2009, 02:50 PM	#111
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: My 57 Pro Street Here's a quick up-date. I had to come up with a new core support so this is what I did. I took a piece of 2" OD tube and cut it down. Then I welded some nuts on the back of a couple of washers that fit inside the tube and welded them in. They are just tacked on my frame horns for now. Will finish after I make sure everything fits as it should. Kim Attached Images