[55 Chevy Dave]

Thank you Kim, Jim, Advanced Design and PTC for the positive feedback!

PTC, I thought about putting slight bends in the conduits and letting them die into the boxing plates without the 90 degree elbows, but I didn't want to be left with big long holes to seal up against the elements.

I also thought about putting pull ropes through the conduits as I installed them, but didn't think those would make it through the process and be usable after I got the chassis back from powder coating.

My plan (which may or may not work) to get the wiring through the 90 degree elbows is to push a piece of welding wire from one end of each conduit out to the other end and then tie the wires to the end of the welding wire and pull it back through. Combined with plenty of lube at each 90 and I believe it will work. Guess we will all find out in a later post!