The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Speed Engineering LS Swap Headers Findings

jjzepplin · 06-08-2020, 03:44 PM

My 99 Fbody manifolds would not fit my 72 Blazer. I got the 1 3/4" long tubes and the passenger side needed the frame massaged a bit to fit right. I just bent the frame up a bit. I am mating the T56 to it and other than that the headers seem to be a pretty good fit. I am however planning on using the original F body Master cylinder which if I am correct would be in a totally out of the way spot. I am still mocking everything up at this point.

06-08-2020, 03:44 PM	#151
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,545	Re: Speed Engineering LS Swap Headers Findings My 99 Fbody manifolds would not fit my 72 Blazer. I got the 1 3/4" long tubes and the passenger side needed the frame massaged a bit to fit right. I just bent the frame up a bit. I am mating the T56 to it and other than that the headers seem to be a pretty good fit. I am however planning on using the original F body Master cylinder which if I am correct would be in a totally out of the way spot. I am still mocking everything up at this point. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 Last edited by jjzepplin; 06-09-2020 at 01:16 PM.