[clinebarger]

Install the parking pawl bracket (86) & The parking pawl bracket bolts (87), Engage Park, Verify the Output shaft does not turn. (This will aid in Input Drum Install)

1.Install the selective thrust washer (616) on the input housing (621).
2.Install the stator shaft/selective washer bearing assembly (615) on the input
housing (621). The black race on the bearing goes (up) toward the pump.
3.Install the reverse input clutch assembly (605) on the input housing (621).
4.Index the reverse input clutch plates with the input clutch hub. Make
certain all clutch plates are fully engaged.